There is a problem with mt76 and 7603
https://github.com/openwrt/mt76/issues/145
1 Like
Hi
I could install NATCAP but while trying to login I get "no supported authentication methods available (server send: publickey)" and via the website I also cannot login....
What step did I miss?
I did
mtd write natcap-kernel1 kernel1
mtd write natcap-rootfs0.bin rootfs0
nvram set flag_last_success=1
nvram commit
reboot
Thanks for help!
EDIT:
OK managed to get on it finally! 
However now the whole system is running in Chinese ... I hope I can find a setting for that lol
Edit 2: OK i can login via Website but not via SSH 
EDIT. OK got that to work now too... Just Mesh ain't working yet 
1 Like
If you are interested, we have just begun to sell the Xiaomi Mi 3 router with the latest version of LEDE / Openwrt.
Xiaomi-Mi-Router-3-cz
1 Like
how to log in trhu ssh
I had to activate that but I in the mean time installed OpenMesh as Firmware anyway.
Also it seems you cannot currently install updates for that model - it ain’t finding one of the packages.gz files.
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.087577] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.097027] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.106469] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.115912] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.125355] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.134799] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.144243] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.153686] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.163140] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.172593] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.182037] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.191492] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:35 2018 kern.err kernel: [ 282.200942] ieee80211 phy1: rt2x
00queue_write_tx_frame: Error - Dropping frame due to full tx queue 2
Mon Feb 19 15:43:44 2018 kern.err kernel: [ 285.114537] mtk_soc_eth 10100000
.ethernet eth0: transmit timed out
Mon Feb 19 15:43:44 2018 kern.info kernel: [ 285.120868] mtk_soc_eth 1010000
0.ethernet eth0: dma_cfg:80000065
Mon Feb 19 15:43:44 2018 kern.info kernel: [ 285.127031] mtk_soc_eth 1010000
0.ethernet eth0: tx_ring=0, base=06c57000, max=128, ctx=17, dtx=17, fdx=16, n
ext=17
Mon Feb 19 15:43:44 2018 kern.info kernel: [ 285.137613] mtk_soc_eth 1010000
0.ethernet eth0: rx_ring=0, base=05b6b000, max=128, calc=5, drx=6
Mon Feb 19 15:43:54 2018 kern.err kernel: [ 288.526425] mtk_soc_eth 10100000
.ethernet eth0: transmit timed out
Mon Feb 19 15:43:54 2018 kern.info kernel: [ 288.532754] mtk_soc_eth 1010000
0.ethernet eth0: dma_cfg:80000065
Mon Feb 19 15:43:54 2018 kern.info kernel: [ 288.538917] mtk_soc_eth 1010000
0.ethernet eth0: tx_ring=0, base=05b6b000, max=128, ctx=17, dtx=17, fdx=16, n
ext=17
Mon Feb 19 15:43:54 2018 kern.info kernel: [ 288.549498] mtk_soc_eth 1010000
0.ethernet eth0: rx_ring=0, base=06c57000, max=128, calc=1, drx=2
Mon Feb 19 15:44:04 2018 kern.err kernel: [ 291.944232] mtk_soc_eth 10100000
.ethernet eth0: transmit timed out
Mon Feb 19 15:44:04 2018 kern.info kernel: [ 291.950562] mtk_soc_eth 1010000
0.ethernet eth0: dma_cfg:80000065
Mon Feb 19 15:44:04 2018 kern.info kernel: [ 291.956731] mtk_soc_eth 1010000
0.ethernet eth0: tx_ring=0, base=06c57000, max=128, ctx=17, dtx=17, fdx=16, n
ext=17
Mon Feb 19 15:44:04 2
Mir3
can you post the firmware sir...so that i can test it...
on behalf of sir eddiecz....i apologize
What I selling?? Firmware is free, I'm selling only routers!
OK MY BAD !!! i apologize
can u post ur firmware sir for us to try
how to flash that router is it VIA tftp
I already posted link to firmware.
What firmware you have in router? Original Xiaomi?
yup, yes it original firmware sir
Here are instructions for flashing:
- enable ssh access - info here https://wiki.openwrt.org/toh/xiaomi/mir3
- login via ssh:
nvram set flag_last_success=1
nvram set boot_wait=on
nvram set uart_en=1
nvram commit
mtd write lede-ramips-mt7620nand-miwifi-r3-squashfs-kernel1.bin kernel1
mtd write lede-ramips-mt7620nand-miwifi-r3-squashfs-rootfs0.bin rootfs0
reboot
1 Like
with kernel 4.14 are these messages gone, no dropping frames, see log
U-Boot 1.1.3 (Feb 21 2018 - 21:02:33)
Board: Eddie APSoC DRAM: 128 MB
enable ephy clock...done. SSC disabled.
!!! nand page size = 2048, addr len=4
..============================================
Eddie U-Boot Version: 5.0.1.0-6
--------------------------------------------
ASIC 7620_MP (Port5<->None)
DRAM_CONF_FROM: Auto-detection
DRAM_TYPE: DDR2
DRAM component: 1024 Mbits
DRAM bus: 16 bit
Total memory: 128 MBytes
Flash component: NAND Flash
Date:Feb 21 2018 Time:21:02:33
============================================
icache: sets:512, ways:4, linesz:32, total:65536
dcache: sets:256, ways:4, linesz:32, total:32768
#### The CPU freq = 580 MHZ ####
estimate memory size = 128 Mbytes
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Enter boot command line interface.
5: Load system code then write to Flash via USB Storage.
9: Load U-Boot code then write to Flash via TFTP.
4 3 2 1 0
3: System Boot system code via Flash.
## Checking image at bc600000 ...
Image Name: MIPS OpenWrt Linux-4.14.20
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1582260 Bytes = 1.5 MB
Load Address: 80000000
Entry Point: 80000000
......................... Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 128
Starting kernel ...
[ 0.000000] Linux version 4.14.20 (eddie@eddie-ubuntu64) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6179-a8985e1)) #0 Thu Feb 22 15:03:47 2018
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is Xiaomi Mi Router R3
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x47c with crng_init=0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=0005e3ef
[ 0.000000] Readback ErrCtl register=0005e3ef
[ 0.000000] Memory: 124628K/131072K available (3716K kernel code, 172K rwdata, 884K rodata, 212K init, 221K bss, 6444K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.007585] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.073544] pid_max: default: 32768 minimum: 301
[ 0.078265] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.084643] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.097485] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.107026] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.113015] pinctrl core: initialized pinctrl subsystem
[ 0.118614] NET: Registered protocol family 16
[ 0.384672] PCI host bridge /pcie@10140000 ranges:
[ 0.389284] MEM 0x0000000020000000..0x000000002fffffff
[ 0.394338] IO 0x0000000010160000..0x000000001016ffff
[ 0.406935] random: fast init done
[ 0.418182] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.423635] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.429949] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.435369] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.441660] rt2880_gpio 10000660.gpio: registering 32 gpios
[ 0.447079] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[ 0.453874] PCI host bridge to bus 0000:00
[ 0.457854] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[ 0.464468] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 0.470226] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.476812] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.484994] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.493429] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 0.499846] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 0.506558] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[ 0.513161] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[ 0.520165] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[ 0.526780] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[ 0.533874] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[ 0.540886] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.545694] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
[ 0.552295] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]
[ 0.563470] clocksource: Switched to clocksource systick
[ 0.569768] NET: Registered protocol family 2
[ 0.574924] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.581654] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.587876] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.594158] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.599787] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.606179] NET: Registered protocol family 1
[ 0.612812] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.619498] Crashlog allocated RAM at address 0x3f00000
[ 0.626037] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.638002] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.643654] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.662870] io scheduler noop registered
[ 0.666675] io scheduler deadline registered (default)
[ 0.671909] ralink-usb-phy usbphy: invalid resource
[ 0.676928] Error: Driver 'ralink-usb-phy' is already registered, aborting...
[ 0.684172] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.691387] console [ttyS0] disabled
[ 0.694903] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.704515] console [ttyS0] enabled
[ 0.704515] console [ttyS0] enabled
[ 0.711557] bootconsole [early0] disabled
[ 0.711557] bootconsole [early0] disabled
[ 0.720268] cacheinfo: Failed to find cpu0 device node
[ 0.725550] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.732393] !!! nand page size = 2048, addr len=4
[ 0.740107] mtk_nand_probe: alloc 13a8, at 87de4000 , btt(87de50c0, 100), ranfc_mtd:87de51c0
[ 0.748838] 7 ofpart partitions found on MTD device ra_nfc
[ 0.754449] Creating 7 MTD partitions on "ra_nfc":
[ 0.759350] 0x000000000000-0x000000040000 : "u-boot"
[ 0.765420] 0x000000040000-0x000000080000 : "u-boot-env"
[ 0.771710] 0x000000080000-0x0000000c0000 : "Bdata"
[ 0.777695] 0x0000000c0000-0x000000100000 : "Factory"
[ 0.783797] 0x000000100000-0x000000600000 : "free"
[ 0.791218] 0x000000600000-0x000000a00000 : "kernel"
[ 0.798546] 0x000000a00000-0x000008000000 : "ubi"
[ 0.832941] _nfc_read_raw_data: fail
[ 0.836683] nfc_read_oob: fail
[ 0.839798] nand_block_checkbad: offs:6000000 tag: BAD
[ 0.857701] libphy: Fixed MDIO Bus: probed
[ 0.869823] gsw: setting port4 to ephy mode
[ 0.874175] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex)
[ 0.884002] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 0.890720] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 0.899723] rt2880_wdt 10000120.watchdog: Initialized
[ 0.906245] NET: Registered protocol family 10
[ 0.914517] Segment Routing with IPv6
[ 0.918389] NET: Registered protocol family 17
[ 0.922969] 8021q: 802.1Q VLAN Support v1.8
[ 0.930802] UBI: auto-attach mtd6
[ 0.934292] ubi0: attaching mtd6
[ 1.350630] nand_block_checkbad: offs:6000000 tag: BAD
[ 1.508794] ubi0: scanning is finished
[ 1.524206] ubi0: attached mtd6 (name "ubi", size 118 MiB)
[ 1.529820] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.536892] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.543829] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.550933] ubi0: good PEBs: 943, bad PEBs: 1, corrupted PEBs: 0
[ 1.557074] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 1.564457] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 400183119
[ 1.573700] ubi0: available PEBs: 0, total reserved PEBs: 943, PEBs reserved for bad PEB handling: 19
[ 1.584662] block ubiblock0_0: created from ubi0:0(rootfs)
[ 1.590272] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 1.598199] ubi0: background thread "ubi_bgt0d" started, PID 289
[ 1.611809] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 1.620333] Freeing unused kernel memory: 212K
[ 1.624904] This architecture does not have kernel memory protection.
[ 2.270544] init: Console is alive
[ 2.274358] init: - watchdog -
[ 3.755561] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.901330] usbcore: registered new interface driver usbfs
[ 3.907116] usbcore: registered new interface driver hub
[ 3.912645] usbcore: registered new device driver usb
[ 3.950977] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.966828] SCSI subsystem initialized
[ 3.976183] ehci-platform: EHCI generic platform driver
[ 3.991874] phy phy-usbphy.0: remote usb device wakeup disabled
[ 3.997931] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 4.002484] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 4.008416] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 4.016638] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 4.030192] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 4.037540] hub 1-0:1.0: USB hub found
[ 4.041857] hub 1-0:1.0: 1 port detected
[ 4.049290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.057421] ohci-platform: OHCI generic platform driver
[ 4.063133] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[ 4.070114] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[ 4.078329] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[ 4.111973] hub 2-0:1.0: USB hub found
[ 4.116233] hub 2-0:1.0: 1 port detected
[ 4.123275] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.136905] usbcore: registered new interface driver usb-storage
[ 4.144254] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.152967] init: - preinit -
[ 4.525932] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 4.814581] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 4.835357] scsi host0: usb-storage 1-1:1.0
[ 5.174340] 8021q: adding VLAN 0 to HW filter on device eth0
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 5.472435] scsi 0:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
[ 5.483703] sd 0:0:0:0: [sda] 7886848 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 5.491985] sd 0:0:0:0: [sda] Write Protect is off
[ 5.497292] sd 0:0:0:0: [sda] No Caching mode page found
[ 5.502788] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.513436] sda:
[ 5.518112] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.534232] mount_root: loading kmods from internal overlay
[ 6.584581] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 6.593499] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 7.409754] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 429
[ 7.438533] UBIFS (ubi0:1): recovery needed
[ 7.636193] UBIFS (ubi0:1): recovery completed
[ 7.640850] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 7.648884] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.659031] UBIFS (ubi0:1): FS size: 110215168 bytes (105 MiB, 868 LEBs), journal size 5459968 bytes (5 MiB, 43 LEBs)
[ 7.669868] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 7.676636] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID D5146CF7-192A-433C-96FC-A7A939AF7A47, small LPT model
[ 7.688548] UBIFS (ubi0:1): full atime support is enabled.
[ 7.697361] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 7.706940] block: extroot: not configured
[ 7.719166] UBIFS (ubi0:1): un-mount UBI device 0
[ 7.724072] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 7.755798] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 432
[ 7.835752] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 7.843800] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.853948] UBIFS (ubi0:1): FS size: 110215168 bytes (105 MiB, 868 LEBs), journal size 5459968 bytes (5 MiB, 43 LEBs)
[ 7.864788] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 7.871546] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID D5146CF7-192A-433C-96FC-A7A939AF7A47, small LPT model
[ 7.884369] UBIFS (ubi0:1): full atime support is enabled.
[ 8.409335] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 8.421766] block: extroot: not configured
[ 8.428623] mount_root: switching to ubifs overlay
[ 8.487909] urandom-seed: Seeding with /etc/urandom.seed
[ 8.614823] procd: - early -
[ 8.617887] procd: - watchdog -
[ 9.292350] procd: - watchdog -
[ 9.295948] procd: - ubus -
[ 9.399976] procd: - init -
Please press Enter to activate this console.
[ 9.897468] kmodloader: loading kernel modules from /etc/modules.d/*
[ 9.954047] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 9.975732] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.994247] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.007209] fuse init (API version 7.26)
[ 10.017084] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 10.025328] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 10.037004] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.054634] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 10.123914] usbcore: registered new interface driver ums-alauda
[ 10.132389] usbcore: registered new interface driver ums-cypress
[ 10.140994] usbcore: registered new interface driver ums-datafab
[ 10.149427] usbcore: registered new interface driver ums-freecom
[ 10.158065] usbcore: registered new interface driver ums-isd200
[ 10.166623] usbcore: registered new interface driver ums-jumpshot
[ 10.175201] usbcore: registered new interface driver ums-karma
[ 10.184104] usbcore: registered new interface driver ums-sddr09
[ 10.192631] usbcore: registered new interface driver ums-sddr55
[ 10.201370] usbcore: registered new interface driver ums-usbat
[ 10.226598] xt_time: kernel timezone is -0000
[ 10.301160] mt76x2e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[ 10.307730] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[ 10.319910] mt76x2e 0000:01:00.0: ROM patch already applied
[ 10.327290] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[ 10.332960] mt76x2e 0000:01:00.0: Build: 1
[ 10.337140] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[ 10.353819] mt76x2e 0000:01:00.0: Firmware running!
[ 10.387338] PPP generic driver version 2.4.2
[ 10.397759] NET: Registered protocol family 24
[ 10.522290] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "Factory"
[ 10.529772] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[ 10.537698] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
[ 10.551458] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 20.067157] 8021q: adding VLAN 0 to HW filter on device eth0
[ 20.084196] device eth0 entered promiscuous mode
[ 20.095304] br-lan: port 1(eth0.1) entered blocking state
[ 20.100831] br-lan: port 1(eth0.1) entered disabled state
[ 20.106793] device eth0.1 entered promiscuous mode
[ 20.153001] br-lan: port 1(eth0.1) entered blocking state
[ 20.158594] br-lan: port 1(eth0.1) entered forwarding state
[ 20.164487] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 21.137643] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 24.252913] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.296425] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
[ 24.305238] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
[ 27.263610] ieee80211 phy1: rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
[ 27.275218] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
[ 27.296539] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 1, phase=3d)
[ 27.306780] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
[ 27.328078] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= f, phase=3e)
[ 27.337431] ieee80211 phy1: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
[ 27.454170] ieee80211 phy1: rt2800_rxiq_calibration: Warning - RXIQ calibration FAIL
[ 27.467478] ieee80211 phy1: rt2800_rxiq_calibration: Warning - RXIQ calibration FAIL
[ 27.485408] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 27.492667] br-lan: port 2(wlan0) entered blocking state
[ 27.498174] br-lan: port 2(wlan0) entered disabled state
[ 27.503997] device wlan0 entered promiscuous mode
[ 27.520462] br-lan: port 3(wlan1) entered blocking state
[ 27.525899] br-lan: port 3(wlan1) entered disabled state
[ 27.531817] device wlan1 entered promiscuous mode
[ 27.551996] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 27.558680] br-lan: port 3(wlan1) entered blocking state
[ 27.564163] br-lan: port 3(wlan1) entered forwarding state
[ 27.871146] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.877838] br-lan: port 2(wlan0) entered blocking state
[ 27.883330] br-lan: port 2(wlan0) entered forwarding state
[ 37.541347] random: crng init done
1 Like
I know it may sound a "dumb" question but, after flashing this firmware you provided, will i be able to flash the next firmwares through web interface or cli as soon as all this fixes be merged on main and a firmware get compiled by OpenWRT/LEDE crew?
hi eddiecz, how to download your Xiaomi-Mi-Router-3-firmware
Best fw Openwrt for Xiaomi Router 3
http://4pda.ru/forum/index.php?showtopic=736801&view=findpost&p=68306060
First for flash
https://drive.google.com/file/d/1yhezesLxPWPCcfwQO1ved38t2i3UlgBW/view?usp=drivesdk3
Update https://drive.google.com/file/d/18E0FSoqRXzzHwuxeRX7JxSfoUI1hry9r/view?usp=drivesdk12