Everybody labels flashing to OpenWRT or LEDE as "one-way" action because thet suspect that OpenWRT/LEDE "changes something" in the flash, so it breaks any restore to stock ROM . Bellow I list them:
OpenWRT/LEDE misses partitions of the stockROM partitions. Bellow is the partition table with stock ROM:
U-Boot partition
partition fs-uboot base 0x00000 size 0x20000
partition partition-table base 0x20000 size 0x02000
Firmware partitions
fwup-ptn partition-table base 0x00800 size 0x00800
fwup-ptn os-image base 0x01000 size 0xcbf29
fwup-ptn soft-version base 0xccf29 size 0x00015
fwup-ptn support-list base 0xccf3e size 0x0063c
fwup-ptn file-system base 0xcd57a size 0x3e4001
OpenWRT/LEDE changes something in the environment of the SafeLoader, which breaks the standard recovery mode.
Can anybody check it and (if feasible), patch LEDE to solve it?
Have the same problem and find the same problem with CPE510 HW 1.1.
I expand the report allready.
Can some one confirm problems on CPE510 HW 1.1 or have I open a new thread?
I had a old build. But i was able to revert to original firmware with tftpd64. It didn't require a switch, but i did plug it into the LAN1 port of the unit, rather than the poe injector. Used a Thinkpad with a intel nic, windows 8, and set my IP to desired, and BINDed thje address in TFTPd64 (can do it in the options, i presume to make it less prone to guess the interface) to 192.168.0.100, and let the unit have power for several minutes (to program and reboot) and sure enough pharos booted back to original firmware. Have to rename the firmware recovery.bin.